The Platinum 200 3G is designed to deliver the scale and authority of a large floorstanding loudspeaker while maintaining a relatively compact and elegant profile. Its three-way architecture separates bass, midrange, and high-frequency reproduction, allowing each driver to operate within an optimized range for greater clarity, precision, and dynamic control.
The dual 6-inch RDT III bass drivers provide powerful and controlled low-frequency reproduction, while the dedicated 4-inch RDT III midrange driver focuses on the critical frequencies responsible for vocals and instruments. The combination helps produce a coherent presentation with excellent tonal balance and reduced distortion.
At the top of the system, the MPD III transducer delivers highly extended and detailed high-frequency reproduction. The 825 Hz and 3 kHz crossover points allow the three driver sections to integrate smoothly, contributing to the Platinum 200 3G's expansive soundstage and precise imaging.
With 88 dB sensitivity, a 4-ohm nominal impedance, and recommended amplification from 150 to 600 watts, the Platinum 200 3G is designed for serious high-end amplification. Its combination of advanced RDT III drivers, MPD III technology, sophisticated cabinet construction, and premium finishes makes it equally suited to demanding two-channel listening and high-end home theater systems.
- Component type: 3-way floorstanding speaker
- Frequency response: 32 Hz – 60 kHz (-6 dB) free-field; 23 Hz – 60 kHz in-room
- Sensitivity: 88 dB (2.83 V @ 1 m)
- Nominal impedance: 4 ohms
- Minimum impedance: 4.0 ohms @ 2.5 kHz
- Power handling: 300 W RMS
- Recommended amplifier power: 150–600 W
- Bass alignment: Bass reflex
- Port tuning frequency: 38 Hz
- Crossover frequencies: 825 Hz / 3 kHz
- Drivers: 2 × 6-inch RDT III bass; 1 × 4-inch RDT III midrange; 1 × MPD III tweeter
- Dimensions (H × W × D): 1041.6 × 368.7 × 454.9 mm with spikes
- Weight: 35.8 kg each